. This NEW Compact turbocharger TO4E/B 57 trim will bolt directly up your, Typhoon or Syclone exhaust manifold and down pipe. Also available in other flange styles. You will need to change you oil lines to garret fittings. It is very easy to do. Kit are available. You need to change you oil lines when you swap a turbo anyhow.
This 57 trim has the tight fit compressor housing. It is easer to fit in smaller places. As we know hte Radiator is very close to the turbo n the typhoon and Syclone. I would suggest using the TO4B Compressor housings. They come with a 3in intake pipe. Easy to run a 90 degree Silicone connector to you air filter. The 57 trim wheels are designed more for high boost applications. Working best with Low compression engine. The SY/TY are a 8.5:1 ( the golden number for turbo charging) this turbo will pull Extremely hard at low end and top end. Every one has been very surprised by the power of these Turbos.
These amazing turbine housings are designed by BULLSEYE. They are by far the best turbine housings made. No only do they outperform but, they are built to last!! This is a Full T4 turbocharger. It has a custom casted STEEL turbine housing that will out spool any other turbine in it class. Especially with this amount of Hp.
On my personal Typhoon, I can pre-spool 12lbs or boost before o launch. Its like getting shot out of a cannon when all four wheels are chirping. A rush like no other. It Is also optional with a huge built in 38mm built in Wastegate. Rated up too 600hp+ with out any Boost spike at all.
The compressor wheel is a To4e 57 trim It can support 55bs/min. (500hp+)
The turbine wheel is a T4 Hp “P” trim. This wheel is what really unleashes the power output on your exhaust.
Shipping Weight 25.00 lbs.
Material
Color
Turbine Housing
Please contact us at 1-866-3TURBOS for information or to place an order.
