This has the 66mm inducer which is rated at 80 lbs/min, this turbo is designed to work efficiently between 650-800whp. The extended fins do not hamper spool-up. The compressor wheel is designed to remove excess weight, reducing overall rotating mass. Of particular importance is the reduction of weight at the outer edges which is a major factor for reducing inertia. The weight reduction and where it is reduced allows these compressor wheels to spool FAST. Map Width Enhancement Grooves These grooves allow air to be pulled and fed directly into the second set of blades on the compressor wheel outside of the main inlet. This most notably increases the efficiency of the compressor as well as overall air flow, hence the name, Map Width Enhancement Grooves: it produces "wider" compressor maps.Along with the increased efficiency, feeding the second set of blades directly helps decrease spool time. Combine that with the lightweight, Extended Tip compressor wheel and that is exactly how the S200 and S300 can make as much or more power than larger turbos and spool quicker doing it! This is a great choice for a high Hp RX7 project.This turbo will work on other 4 cylinders. We also carry flanges. The turbochargers listed are our most popular Turbos. We also carry many other supplies and turbocharger. If there is some you are looking for and to not see, Please!!! call or email us. Don’t forget to take advantage of our Turbocharger REBUILDING!
Please contact us at 1-866-3TURBOS for information or to place an order.
| ||||||||||||||||||
